Building a Simulation-in-the-loop Sensor Data Testbed for Cloud-enabled Pervasive Applications

When experimenting with pervasive systems consisting of numerous intercommunicating machines and sensors, it quickly becomes desirable to mix simulated virtual nodes and real world machines. This will enable the implementation of a test-bed where a large number of simulated nodes, instead of a potentially very expensive set of real prototype devices, are interacting with a smaller number of physical devices through real world physical network hardware. Such setups are referred to as “simulation-in-the-loop” systems, where it is possible to send and receive simulator generated packets on real world devices. This approach will also inherently ensure a certain degree of validity and realism of the simulation models as packets generated within the simulator must travel through a real network and be successfully received by a physical machine which, ideally, has no way of knowing if the packet originated from a simulated node or a real one. In this paper, we are presenting the design principles for an interconnected test-bed system for trialing the data handling capabilities of cloud-enabled sensor systems.

Antti Iivari, Jussi Ronkainen (VTT): Building a Simulation-in-the-loop Sensor Data Testbed for Cloud-enabled Pervasive Applications

Presented at the 10th International Conference on Future Networks and Communications (FNC 2015) / The 12th International Conference on Mobile Systems and Pervasive Computing (MobiSPC 2015) Affiliated Workshops

http://www.sciencedirect.com/science/article/pii/S1877050915017007

Share on LinkedInGoogle+Tweet about this on TwitterShare on FacebookEmail to someone